Eco - Friendly Portable 3D Artistic Drawing Printing Pen Printer
With UV Light And Colorful Inks
1. To control the material extrusion velocity, suggest that you can
control the speed of buy 3D printing pen supplies extrusion
velocity affects the heating uniformity of absolute line thickness
and supplies, just beginning to grasp the rhythm with really bad,
resulting in irregular supplies effect, or a lot of bubble rupture,
feel inferior, this is indeed inevitable, it is difficult to ensure
consistent things by hand, but the moving speed, good coordination
of 3D printing pen supplies extrusion speed and position of the
hand is the use of key 3D printing pen.
2. material selection and 3D printing pen temperature adjustment is
now available on the market for 3D printing pen is mainly ABS and
PLA these two kinds of supplies, of course there are some with
special properties, for temperature change, light, flexible, wood
and so on, different supplies suitable temperature are not the
same, so it is recommended to buy temperature 3D printing pen point
range. Different materials need to try out the best condition with
different temperature and extrusion speed, found no bubbles and
supplies uniform extrusion leads to uneven heating of the crackling
sound supplies can be produced.
3. non flexible supplies made of broken products have been broken,
then finished the use of PLA non flexible materials, this material
is more likely to produce three-dimensional effect, but at the same
time easily broken fragile, hand can easily break. Flexible
supplies relative toughness, but the stiffening effect is very
general, and color and texture are not flexible, using 3D printing
pen on the market have special properties of supplies are also non
flexible. So at that time I carried the work, it was a strenuous,
crisp life, and need to have been followed by the work, where the
fracture in the two fractures, with hot materials bonded. In the
parts that need to be stressed, also try to use flexible materials,
but flexible and non flexible can not be integrated at all, only
through the ring, buckle, etc., to achieve the two supplies of
Light-cured 3D Printing Pen
Place of Origin:
Nanjing, Jiangsu, China
Battery Working Time
3D Printing, Gadgets creation, Education, Toys
253*145*50mm GW: 600g
2 Years(under suitable environment)
5 Years(under suitable environment)
3D Creative Pen
Colorful Ink Refills
Multi-functional Ink Refills
USB, Safety Pin, Manual, Dust-free Paper, Pen Holder, Drawing Board
Traditional hot-melting 3D Pen(melting plastic )
Polyes Q1 (light-curing)
Using PLA/ABS material, heating through 200 ~ 220℃ to melt into
liquid, then extrude to draw and wait until solidified.
Using light-sensitive resin which is liquid, cured by LED light;
extrude through micro motor; portable after charging without the
limitation of power supply.
Adopting the principle of glue gun, to extrude the PLA/ABS after
melting with 200-220 ℃. Users will easily get burnt and must use
Wireless and chargeable, without danger or heat; safety switch
guarantees children to safely use
Consumable material itself contains impurities which easily cause
Using high purity resin, without impurities, no jam; replaceable
ink; lower usage cost; better customer experience.
Limited color richness
No special effect
Rich colors; Aromatic; Glow in Dark; Transparent; Color Changing
Low technology, easy to copy
High technical barriers, with multiple patents, including laser,
mechanical and electrical, materials technology
Introduction Of Future Make Team
Now we have 61 technical and management personnel (including the
United States). Many of these technology research and development
personnel with senior professional technical and senior developer
certification; Bachelor degree or above occupy 87.5% of total
employees, a master's degree occupy 25%, senior titles occupy 10%,
1 postdoctoral mentor. Team has set up a growth mechanism for
technology research and development personnel to ensure their
knowledge and experience growth; Stable management team, with
strong innovation consciousness, learning ability and executive
ability. In the company's core management personnel, we have
seniors with more than 10 years of material manufacturing, rapid
prototyping manufacturing industry , who has forward-looking grasp
of market development, and keenly capture industry development
opportunities, promote and guide the rapid development.
Q1: Is it safe for my children to use Polyes Q1 3D Printer Pen and
Polyes Q1 is eco-friendly and especially designed for children,
because we have child-safety switch and tilt-sensor to avert the
potential risk. And we have CE and FCC Certificate, so it is safe
for children to use.
Q2: What is the charging time and usage time Polyes Q1 3D Printer
It takes about 2.5 hours to charge and uses for 1.5-2hours.
Q3:Hong long can Polyes Q1 3D Printer Pen be used?
Around 2 years under suitable environment and care.
Q4: What is the drawing length,usage time and expiration date of
one cool ink cartridge?
You can draw 25-30 meters which will take around half to 1 hour.
The ink cartridge should be kept in a cool, dark place and if you
keep it correctly, its shelf life would be 6 to 12 months.
Evaluation from Different Parties
1, Won the most investable venture by American MakeCon,2015.
2, In headlines of San Francisco Business
3, Won the best creative products in science and technology cycle
hold by national ministry of science and technology, the ministry
4, The 2015 international consumer electronics show (CES) official
5, Project reporting by French national science and technology
6, Project reporting by China central television CCTV about global